BITUMEN MC30 is a type of cutback bitumen that is suitable for cold regions. It is a liquid bitumen that consists of a penetration grade bitumen and a petroleum-based solvent. The solvent reduces the viscosity of the bitumen and allows it to penetrate the surface of the base course.

The uses of BITUMEN MC30 include:

• Priming newly constructed, crushed stone or natural gravel base courses prior to surfacing. This provides adhesion between the base course and the new surfacing.
• Road maintenance operations, such as tack coats and slurry seals. This helps to seal cracks and prevent water ingress.

The industries that use BITUMEN MC30 are mainly related to road construction and paving, such as:

• Highway and road contractors
• Asphalt and bitumen manufacturers
• Civil engineering and infrastructure projects

The technical specifications of BITUMEN MC30:

– Kinematic viscosity at 60°C: 30-60 cSt
– Dynamic viscosity at 60°C: 30-70 Pa·s
– Flash point: >38°C
– Distillation to 360°C, % v/v: to 190°C: 15 max; to 225°C: 50-60; to 260°C: 80-85; to 316°C: 100 max
– Residue from distillation to 360°C, % v/v: 50 min
– Viscosity at 60°C on residue from distillation, Pa·s: 30 min

Related Products:

BITUMEN VG30

BITUMEN MC30

Finally, if you are looking for BITUMEN VG40 from the top producers plants, Arena Petro Gas company is ready to supply you as its trading services according to your requirements and in accordance to the manufacturers’ specifications, you can easily submit your order online.

Please enable JavaScript in your browser to complete this form.

Full Name *

Email

Phone (WhatsApp number) *

Destination *

Quantity (MT) *

Submit

The post BITUMEN VG40 appeared first on Arena Petro Gas.

In addition, BITUMEN 85/100 is a type of asphalt that is derived from crude petroleum refining. It has a dark color and has waterproofing and adhesive properties. It is also substantially non-volatile, which means it does not evaporate easily, and it softens gradually when heated. The number 85/100 indicates the penetration grade of the bitumen, which is a measure of its hardness or consistency. The penetration grade is determined by the depth (in tenths of a millimeter) that a standard needle can penetrate into a sample of bitumen at 25°C under a load of 100 grams for 5 seconds. The higher the penetration, the softer the bitumen. BITUMEN 85/100 has a penetration range of 80 to 100, which means it is relatively soft compared to other grades of bitumen.

BITUMEN 85/100 has various uses in different industries, especially in road construction and surfacing. It commonly uses for the production of hot mix asphalt (HMA) for the base and wearing courses of pavements. HMA is a mixture of bitumen and aggregates (such as sand, gravel, or crushed stone) that is heated, mixed, and compacted to form a durable and smooth surface. BITUMEN 85/100 is suitable for HMA because it has a high viscosity, which enables a thinner pavement design and an overall 30 percent reduction in the amount of asphalt being applied. BITUMEN 85/100 can also use to manufacture cut-back bitumen, bitumen emulsions, and modified bitumen, which are other forms of asphalt products that have different properties and applications.

The technical specifications of BITUMEN 85/100 vary depending on the source and the manufacturer of the product. However, some common specifications are based on international standards and test methods, such as ASTM, AASHTO, EN, and BS. For example, according to Petra Oil Bitumen, one of the manufacturers of BITUMEN 85/100, the product has the following specifications:

| Property | Unit | Range | Method |
| — | — | — | — |

• | Specific Gravity @25°C | Kg/Cm3 | 1.01-1.06 | ASTM D70 |
• | Penetration @25°C | MM/10 | 80-100 | ASTM D5 |
• | Softening Point °C | °C | 42-50 | ASTM D36 |
• | Ductility @25°C | CM | 100- | ASTM D113 |
• | Loss on Heating (wt) % | WT % | -0.5 | ASTM D6 |
• | Drop in Penetration After Heating | % | -20 | ASTM D5-D6 |
• | Flash Point °C | °C | 232- | ASTM D92 |
• | Solubility in CS2 (wt) % | WT % | 99- | ASTM D2042 |
• | Spot Test | – | Negative- | AASHTO T102 |

Finally, if you are looking for BITUMEN 80-100 from PASARGAD OIL COMPANY plants, Arena Petro Gas company is ready to supply you as its trading services according to your requirements and in accordance to the manufacturers’ specifications, you can easily submit your order online.

Please enable JavaScript in your browser to complete this form.

Full Name *

Email

Phone (WhatsApp number) *

Destination *

Quantity (MT) *

Submit

The post BITUMEN 85/100 appeared first on Arena Petro Gas.

In addition, BITUMEN 90-10 is a type of penetration graded bitumen that is derived from crude petroleum refining. It has a dark color and exhibits waterproofing and adhesive properties. It is substantially non-volatile and softens gradually when heated, also It can also produced by air-blowing of penetration grade bitumen at high temperatures, resulting in a material with a higher penetration index. This process increases the viscosity, softening point and flash point** of the bitumen.

BITUMEN 90-10 has various uses in different industries, such as:

• Road construction: It use as an adhesive for asphalt toppings and bituminous layers of roadway structures, as well as for crack sealing and repairmen. It has a wide temperature range of usability and provides durable asphalt topping.
• Building industry: It use for roofing membranes, water-proofing felts, damp proofing, and isolation bitumen membrane sheets. It also serves as a base for synthetic turf and an insulating and impregnating agent.
• Chemical industry: It use in paints, lacquers, varnishes, adhesives, and mastics. It also acts as a corrosion protection agent for metals and pipes.
• Textile industry: It use as a processing aid for textile materials.

The technical specifications of BITUMEN 90-10 :

| Parameter | Test Method | Unit | Specification |
|———–|————-|——|—————|

• | Specific gravity @25/25 °C | ASTM D70 | Kg/m3 | 1.05 approx. |
• | Penetration @ 25°c | ASTM D5 | mm/10 | 5/15 |
• | Softening point °c | ASTM D36 | °C | 85/95 |
• | Loss on heating(wt) % | ASTM D6 | Wt. % | 0.2 Max |
• | Flashpoint °c | ASTM D92 | °C | 250 min |
• | Solubility is CS2(wt) % | ASTM D4 | Wt. % | 99.5 min |
• | Spot test | A.A.S.H.T.O 102 | — | Negative |
• | Ductility @25 °c | ASTM D113 | cm | 1.5 min |

Finally, if you are looking for BITUMEN 90-10 from the top producers plants, Arena Petro Gas company is ready to supply you as its trading services according to your requirements and in accordance to the manufacturers’ specifications, you can easily submit your order online.

Please enable JavaScript in your browser to complete this form.

Full Name *

Email

Phone (WhatsApp number) *

Destination *

Quantity (MT) *

Submit

The post BITUMEN 90-10 appeared first on Arena Petro Gas.

BITUMEN MC30 is a type of cutback bitumen that is suitable for cold regions. It is a liquid bitumen that consists of a penetration grade bitumen and a petroleum based solvent. The solvent reduces the viscosity of the bitumen and allows it to penetrate the surface of the base course.

The uses of BITUMEN MC30 include:

• Priming newly constructed, crushed stone or natural gravel base courses prior to surfacing. This provides adhesion between the base course and the new surfacing.
• Road maintenance operations, such as tack coats and slurry seals. This helps to seal cracks and prevent water ingress.

The industries that use BITUMEN MC30 are mainly related to road construction and paving, such as:

• Highway and road contractors
• Asphalt and bitumen manufacturers
• Civil engineering and infrastructure projects

The technical specifications of BITUMEN MC30:

– Kinematic viscosity at 60°C: 30-60 cSt
– Dynamic viscosity at 60°C: 30-70 Pa·s
– Flash point: >38°C
– Distillation to 360°C, % v/v: to 190°C: 15 maxes; to 225°C: 50-60; to 260°C: 80-85; to 316°C: 100 maxes
– Residue from distillation to 360°C, % v/v: 50 min
– Viscosity at 60°C on residue from distillation, Pa·s: 30 min

Related Products:

BITUMEN VG40

Finally, if you are looking for BITUMEN MC30 from the top producers plants, Arena Petro Gas company is ready to supply you as its trading services according to your requirements and in accordance to the manufacturers’ specifications, you can easily submit your order online.

Please enable JavaScript in your browser to complete this form.

Full Name *

Email

Phone (WhatsApp number) *

Destination *

Quantity (MT) *

Submit

The post BITUMEN MC30 appeared first on Arena Petro Gas.

BITUMEN MC30 is a type of cutback bitumen that is suitable for cold regions. It is a liquid bitumen that consists of a penetration grade bitumen and a petroleum-based solvent. The solvent reduces the viscosity of the bitumen and allows it to penetrate the surface of the base course.

The uses of BITUMEN MC30 include:

• Priming newly constructed, crushed stone or natural gravel base courses prior to surfacing. This provides adhesion between the base course and the new surfacing.
• Road maintenance operations, such as tack coats and slurry seals. This helps to seal cracks and prevent water ingress.

The industries that use BITUMEN MC30 are mainly related to road construction and paving, such as:

• Highway and road contractors
• Asphalt and bitumen manufacturers
• Civil engineering and infrastructure projects

The technical specifications of BITUMEN MC30:

– Kinematic viscosity at 60°C: 30-60 cSt
– Dynamic viscosity at 60°C: 30-70 Pa·s
– Flash point: >38°C
– Distillation to 360°C, % v/v: to 190°C: 15 max; to 225°C: 50-60; to 260°C: 80-85; to 316°C: 100 max
– Residue from distillation to 360°C, % v/v: 50 min
– Viscosity at 60°C on residue from distillation, Pa·s: 30 min

Finally, if you are looking for BITUMEN VG30 from the top producers plants, Arena Petro Gas company is ready to supply you as its trading services according to your requirements and in accordance to the manufacturers’ specifications, you can easily submit your order online.

Please enable JavaScript in your browser to complete this form.

Full Name *

Email

Phone (WhatsApp number) *

Destination *

Quantity (MT) *

Submit

The post BITUMEN VG30 appeared first on Arena Petro Gas.

Bitumen 40-50 is a type of petroleum product that is used for various applications in road construction and industrial sectors. It is produced by oxidizing vacuum bottom, which is the residue of crude oil distillation, at high temperatures and pressures in bitumen production units. The name Bitumen 40-50 refers to its penetration grade, which is a measure of its hardness and consistency. The penetration grade indicates the depth that a standard needle can penetrate into a bitumen sample at 25°C under a fixed load and time. Bitumen 40-50 has a penetration range of 40 to 50 mm/10, which means it is relatively hard and suitable for hot climates.

Some of the uses of Bitumen 40-50 are:

– Construction and maintenance of flexible pavements, especially in tropical regions, where it provides good resistance to rutting and cracking.
– Road surfacing and industrial applications, such as roofing, waterproofing, insulation, and coating.
– Manufacturing of asphalt mixes, cut-back bitumen, bitumen emulsions, and modified bitumen, which are used for different purposes depending on the desired properties and performance.

the technical specifications of Bitumen 40-50 :

• | Specific Gravity @25°C | kg/m3 | ASTM D70 or D3289 | 1010-1060 |
• | Penetration @25°C | mm/10 | ASTM D5 | 40-50 |
• | Softening Point | °C | ASTM D36 | 52-60 |
• | Ductility @25°C | cm | ASTM D113 | 100 (Min) |
• | Loss on Heating | wt % | ASTM D6 | 0.2 (Max) |
• | Drop in Penetration after Heating | % | ASTM D5 & D6 | 20 (Max) |
• | Flash Point (Cleveland open cup) | °C | ASTM D92 | 232 (Min) |
• | Solubility in Trichloroethylene | wt % | ASTM D2042 | 99.0 (Min) |
• | Spot Test | – | AASHOT102 | Negative |

Finally, if you are looking for BITUMEN 40-50 from the top producers plants, Arena Petro Gas company is ready to supply you as its trading services according to your requirements and in accordance to the manufacturers’ specifications, you can easily submit your order online.

Please enable JavaScript in your browser to complete this form.

Full Name *

Email

Phone (WhatsApp number) *

Destination *

Quantity (MT) *

Submit

 

The post BITUMEN 40-50 appeared first on Arena Petro Gas.

In Addition, it is a type of bitumen, which is a petroleum product that obtaine from the distillation of crude oil. Bitumen 60/70 has a penetration value of 60 to 70 mm, which means that a standard needle can penetrate 60 to 70 millimeters into a sample of bitumen at 25 °C under a load of 100 grams for 5 seconds. The penetration value indicates the hardness or softness of bitumen, with lower values indicating harder bitumen and higher values indicating softer bitumen.

Bitumen 60/70 mainly use as a paving grade bitumen, which means that it is suitable for road construction and asphalt production. Bitumen 60/70 can withstand various temperatures and is ideal for moderate climates. It can also use for waterproofing applications, such as roofing and insulation.

Bitumen 60/70 has different technical specifications depending on the producer and the region. Some of the common specifications are:

– Specific gravity at 25 °C: 1.01 to 1.06
– Softening point: 49 to 56 °C
– Ductility at 25 °C: 100 cm minimum
– Loss on heating: 0.2% maximum
– Drop in penetration after heating: 20% maximum
– Flash point: 250 °C minimum
– Solubility in trichloroethylene: 99% minimum
– Organic matter insoluble in CS2: Spot test negative

Finally, if you are looking for BITUMEN 60-70 from PASARGAD OIL COMPANY-JEY OIL COMPANY- SHIRAZ OIL REFINING plants, Arena Petro Gas company is ready to supply you as its trading services according to your requirements and in accordance to the manufacturers’ specifications, you can easily submit your order online.

Please enable JavaScript in your browser to complete this form.

Full Name *

Email

Phone (WhatsApp number) *

Destination *

Quantity (MT) *

Submit

 

The post BITUMEN 60-70 appeared first on Arena Petro Gas.

In addition, Bitumen 80/100 is a type of asphalt that is derived from crude petroleum refining. It has a dark color and has waterproofing and adhesive properties. It is also substantially non-volatile, which means it does not evaporate easily, and it softens gradually when heated. The number 80/100 indicates the penetration grade of the bitumen, which is a measure of its hardness or consistency. The penetration grade is determined by the depth (in tenths of a millimeter) that a standard needle can penetrate into a sample of bitumen at 25°C under a load of 100 grams for 5 seconds. The higher the penetration, the softer the bitumen. Bitumen 80/100 has a penetration range of 80 to 100, which means it is relatively soft compared to other grades of bitumen.

Bitumen 80/100 has various uses in different industries, especially in road construction and surfacing. It commonly uses for the production of hot mix asphalt (HMA) for the base and wearing courses of pavements. HMA is a mixture of bitumen and aggregates (such as sand, gravel, or crushed stone) that is heated, mixed, and compacted to form a durable and smooth surface. Bitumen 80/100 is suitable for HMA because it has a high viscosity, which enables a thinner pavement design and an overall 30 percent reduction in the amount of asphalt being applied. Bitumen 80/100 can also use to manufacture cut-back bitumen, bitumen emulsions, and modified bitumen, which are other forms of asphalt products that have different properties and applications.

The technical specifications of bitumen 80/100 vary depending on the source and the manufacturer of the product. However, some common specifications are based on international standards and test methods, such as ASTM, AASHTO, EN, and BS. For example, according to Petra Oil Bitumen, one of the manufacturers of bitumen 80/100, the product has the following specifications:

| Property | Unit | Range | Method |
| — | — | — | — |

• | Specific Gravity @25°C | Kg/Cm3 | 1.01-1.06 | ASTM D70 |
• | Penetration @25°C | MM/10 | 80-100 | ASTM D5 |
• | Softening Point °C | °C | 42-50 | ASTM D36 |
• | Ductility @25°C | CM | 100- | ASTM D113 |
• | Loss on Heating (wt) % | WT % | -0.5 | ASTM D6 |
• | Drop in Penetration After Heating | % | -20 | ASTM D5-D6 |
• | Flash Point °C | °C | 232- | ASTM D92 |
• | Solubility in CS2 (wt) % | WT % | 99- | ASTM D2042 |
• | Spot Test | – | Negative- | AASHTO T102 |

Finally, if you are looking for BITUMEN 80-100 from PASARGAD OIL COMPANY plants, Arena Petro Gas company is ready to supply you as its trading services according to your requirements and in accordance to the manufacturers’ specifications, you can easily submit your order online.

Please enable JavaScript in your browser to complete this form.

Full Name *

Email

Phone (WhatsApp number) *

Destination *

Quantity (MT) *

Submit

The post BITUMEN 80-100 appeared first on Arena Petro Gas.